Standing seam clamps preserve models in place, from snow retention and photo voltaic panels to signage, HVAC models, and even stabilizing gasoline piping. Nonetheless, realizing which clamp to make use of for a particular accent and the way the clamps carry the load is vital to sturdy efficiency.
Snow retention clamps
These are non-ferrous, non-piercing clamps for attachments to standing seam steel roofs and are pre-packaged with the stainless-steel bolts and set screws wanted for set up, in addition to a driver for set screws (one driver per field). The round-point design of the set screw ensures that it’s going to not pierce the panel, and the stainless bolts are the acquainted English customary 5/16-18 bolt—not metric.
When these clamps are used for snow retention, they’ve two attachment set screws that, when correctly put in and torqued, forestall the clamp from migrating down the seam whereas underneath a load. Snow retention clamps have been examined on numerous panel varieties and producers. This testing data will support in calculating what number of clamps are wanted and the sample through which the clamps should be put in to correctly deal with the masses required for a particular venture.
When planning for rooftop attachment of equipment reminiscent of photo voltaic panels, the clamps used are a mini-style, which makes use of just one setcrew to connect the clamp to the standing seam. Mini-style clamps shouldn’t be used for snow retention administration techniques, as they’re supposed for mounting roof equipment.
Nonetheless, it’s value noting that the majority mini-style clamps and snow retention clamps have a number of accent mounting holes for numerous attachment rooftop choices.
Standing seam roof clamps for fall safety
When contractors are engaged on a standing seam roof, a roof clamp is accessible for security tie-off. The standing seam roof clamp is put in over a clip on a very seamed connected roof part. The distinctive flip design of the DFSSRC-03 clamp permits for match on each the MR24 and the VSR-style seams simply by eradicating the bolts, turning one aspect of the clamp across the ring, and changing the bolts. The benefit of this clamp is that there is no such thing as a injury to the roof panels or completed seams and no roof penetrations.
This sturdy, all-steel development standing seam roof clamp is accessible with zinc electroplate end and has been examined to satisfy and exceed the next Occupational Security and Well being Administration (OSHA) requirements: 1910.140 – Private Fall Safety Methods and 1926.502 – Fall Safety Methods Standards and Practices.
Jerod Webber is the nationwide gross sales supervisor for Dynamic Fastener, situated in Kansas Metropolis, Mo. To be taught extra, go to dynamicfastener.com
