Depreciation Calculator
This depreciation calculator builds a full-year schedule using straight-line or fixed-rate declining-balance depreciation. It shows annual expense, accumulated depreciation and closing book value while preventing the carrying amount from falling below the entered salvage value.
By Dr. Hassan Khames EliwaLast updated
Result
- Total depreciation
- $10,000.00
- Book value
Full-year depreciation schedule
| Year | Opening book value | Depreciation | Accumulated depreciation | Closing book value |
|---|---|---|---|---|
| 1 | $12,000.00 | $2,000.00 | $2,000.00 | $10,000.00 |
| 2 | $10,000.00 | $2,000.00 | $4,000.00 | $8,000.00 |
| 3 | $8,000.00 | $2,000.00 | $6,000.00 | $6,000.00 |
| 4 | $6,000.00 | $2,000.00 | $8,000.00 | $4,000.00 |
| 5 | $4,000.00 | $2,000.00 | $10,000.00 | $2,000.00 |
How it works
Identify the depreciable amount
Asset cost is the starting carrying amount used in this model. Salvage value is the estimated amount left at the end of use, not an extra expense to deduct every year. The depreciable amount is cost minus salvage value. Useful life is entered as a whole number from one to 100 years, and every row represents a complete year.
Under straight-line depreciation, annual expense = (cost − salvage value) ÷ useful life. The same expense is allocated to each year, and the final closing book value equals salvage. Calculations retain unrounded values internally; the displayed cents are not fed back into the following year's calculation.
Apply a declining percentage carefully
Under fixed-rate declining balance, provisional annual expense = opening book value × annual rate. The actual charge is limited to opening book value minus salvage value. This cap protects the salvage floor, including when a high percentage would otherwise push the carrying amount below it. The accepted annual rate is above zero and no more than 100%.
This implementation does not automatically switch to straight-line and does not force a final-year write-down to salvage. Consequently, a low declining rate can leave book value above salvage after the entered useful life. That is a feature of the selected fixed-rate schedule, not a hidden extra depreciation amount. If your accounting policy requires a switch or a terminal adjustment, model that policy separately.
Separate accounting allocation from asset valuation
Book value is original cost less accumulated depreciation under the chosen method. It is not a forecast sale price, replacement quote or market appraisal. Depreciation allocates an asset's recorded cost across reporting periods; the asset can have a different market value at every point along the way.
The schedule excludes partial-year conventions, impairment, revaluation, tax-specific recovery classes and bonus depreciation. It also assumes cost, salvage and life remain unchanged throughout the run. Local tax rules and financial-reporting requirements can prescribe different methods and timing. Use this calculator for education and planning, not as financial, accounting or tax advice.
Worked example
Example 1: straight-line equipment
A business records equipment costing $12,000, estimates a $2,000 salvage value and chooses a five-year useful life. Select straight-line with cost 12000, salvage 2000 and life 5. The depreciable amount is $10,000, so first-year depreciation is $2,000.00.
The schedule allocates the same expense in each of the five years. First-year closing book value is $10,000.00, total depreciation is $10,000.00, and ending book value is $2,000.00. The final value is the salvage estimate entered at the start, not an independently estimated disposal price.
Example 2: declining balance reaches the floor
Keep cost $12,000, salvage $2,000 and life five years, but select declining balance at 40%. First-year depreciation is $4,800.00, leaving $7,200.00. The next closing values are $4,320.00 and $2,592.00.
In year four, an unrestricted 40% charge would be $1,036.80, but only $592.00 remains above salvage. The charge is therefore capped at $592.00, leaving $2,000.00. Year five depreciation is $0.00. The reported total depreciation is $10,000.00, and ending book value is $2,000.00.
Expert tips
Common mistakes
- Subtracting salvage from opening book value before applying the declining percentage uses a different formula. Here the rate applies to the full opening balance, with salvage acting only as the minimum closing value.
- Treating depreciation as a new cash payment confuses expense allocation with cash flow. The purchase payment and later depreciation entries generally occur at different times and serve different analytical purposes.
- Using a full-year schedule for an asset placed in service midyear can overstate first-period expense. Partial-year conventions are outside this tool and must be applied separately when the relevant policy requires them.
For education, not financial advice. Results are estimates based on the inputs you give. Lenders, tax authorities and advisers may use different rules, fees and rounding. Check the numbers with a qualified professional before you commit to anything.
Frequently asked questions
What if salvage equals cost?
The depreciable amount is zero, so every year's expense is zero and book value stays at cost. This is accepted as a valid boundary case even though it is uncommon for many operating assets.
Can salvage value be negative?
No. This calculator requires salvage between zero and asset cost. Disposal obligations or restoration liabilities may need separate accounting treatment rather than a negative salvage input in this simplified model.
Is declining balance the same as double declining balance?
Not automatically. Double declining balance commonly starts with a rate of twice the straight-line rate. You can enter that percentage here, but this tool does not add an automatic switch to straight-line.
Why can declining balance finish above salvage?
A fixed percentage may not allocate the whole depreciable amount during the chosen life. The model stops after the entered number of years without forcing a final write-down or changing methods.
Can I use this for tax depreciation?
Only as a general comparison, not as a tax filing schedule. Tax systems can specify recovery periods, conventions, elections and limits that differ from this full-year accounting model. Check the applicable official guidance.
Related calculators
Related guides
MathPercentages people get wrong: change, difference and pointsThe denominator determines the answer. Learn to distinguish percentage change, symmetric difference and percentage-point movements.14 November 2026 · 7 min read
FinancialCompound interest: three real savings scenariosThree practical savings examples show what comes from your deposits, what comes from growth, and which assumptions deserve scrutiny.14 November 2026 · 7 min readSources and standards
About the author
Dr. Hassan Khames Eliwa holds a PhD in Construction & Built Environment and has more than 20 years of international project controls experience. He is Director of Eliwa Project Controls Limited in Auckland and founder of PMMilestone.org and PMMilestone.com.
Buy me a coffee