Circle Calculator
This circle calculator derives radius, diameter, circumference, and area from one known circular measurement. Choose the measurement you have, enter its positive length, and read the remaining dimensions in the selected unit system.
By Dr. Hassan Khames EliwaLast updated
Result
- Radius
- 7 cm
- Diameter
- 14 cm
- Area
- 153.93804 cm²
How it works
Work from one trustworthy measurement
The radius runs from the center to the boundary. The diameter crosses the center from one boundary point to the opposite point and equals twice the radius. Circumference is the distance around the boundary and equals 2πr. Enclosed area is πr². The calculator first converts the chosen measurement to a radius, then derives all four reported quantities from that common value.
Radius mode uses the entry directly. Diameter mode halves it. Circumference mode divides it by 2π. This arrangement makes the input meaning explicit and prevents a diameter field from being mistaken for a radius field. It also means the reported known quantity may be subject to a tiny floating-point reconstruction difference internally, although the displayed rounding normally hides it.
Separate boundary length from enclosed surface
Circumference is a linear measurement, displayed in centimeters or inches. Area is a surface measurement, displayed in square centimeters or square inches. Neither is interchangeable with the other: edging follows the boundary, while a cover or disk occupies the interior. A circular opening’s area also does not specify how a sheet should be cut or how much waste the surrounding rectangular stock will produce.
The accepted measurement must be positive, finite, and no larger than one trillion. The calculator uses the built-in value of π and displays up to six decimal places. Selecting imperial after entering a metric measurement does not convert that measurement; it reinterprets the same number as inches. Convert the original length first whenever you change systems. This page models a mathematically exact circle, not an ellipse or an out-of-round manufactured part.
Worked example
Example 1: a circular stencil
A stencil opening has a radius of 7 centimeters. Select radius and metric units, then enter 7. The calculator reports radius 7 cm, diameter 14 cm, circumference 43.982297 cm, and area 153.93804 cm². The circumference comes from 14π, and the area from 49π. Keep the square unit attached to the area when copying the specification.
Example 2: a round access cover
A circular cover measures 10 inches across its center. Select diameter and imperial units, then enter 10. The results are radius 5 in, diameter 10 in, circumference 31.415927 in, and area 78.539816 in². These values describe the ideal outline, not a clearance allowance. If the cover must pass through an opening, the required fit depends on tolerances and installation details rather than on an area comparison alone.
Expert tips
Common mistakes
- An across-the-center measurement is a diameter. Entering it as a radius doubles circumference and makes area four times too large; select the mode that matches the measurement on your sketch.
- Equal areas do not guarantee equal fit. A narrow rectangle and a circle can cover the same surface area while needing completely different clearances.
- Circumference is not automatically a thick band’s cut length. The relevant path may follow the inside, outside, or neutral axis, depending on the material and fabrication method.
Frequently asked questions
Why does the area have a squared unit?
Area combines two length dimensions. A circle measured in centimeters therefore has an area in square centimeters, while its diameter and circumference remain ordinary centimeter lengths.
Can I start from an area?
Not in this version. Its known-measurement choices are radius, diameter, and circumference. If only area is known, the radius is the square root of area divided by π.
Is π treated as exactly 3.14?
No. The implementation uses JavaScript’s built-in approximation to π, which retains substantially more precision than 3.14. Display rounding occurs only when preparing the result text.
Does this handle an ellipse?
No. An ellipse generally needs two independent axes, and its circumference does not follow the simple circle formula. Use a dedicated ellipse method rather than averaging the axes without explanation.
Should I round before ordering material?
Round for the actual manufacturing or ordering requirement after calculating. Keep geometric measurements distinct from seam, overlap, kerf, or clearance allowances so another person can review those decisions.
Related calculators
Related guides
MathPercentages people get wrong: change, difference and pointsThe denominator determines the answer. Learn to distinguish percentage change, symmetric difference and percentage-point movements.14 November 2026 · 7 min read
MathStandard deviation without the jargonThe average tells you the centre. Standard deviation helps describe the spread, provided you know what the data represents.14 November 2026 · 7 min readSources and standards
About the author
Dr. Hassan Khames Eliwa holds a PhD in Construction & Built Environment and has more than 20 years of international project controls experience. He is Director of Eliwa Project Controls Limited in Auckland and founder of PMMilestone.org and PMMilestone.com.
Buy me a coffee