Fuel Economy Calculator
Convert a fuel-economy rate between US miles per gallon, imperial miles per gallon and litres per 100 kilometres. The gallon definition is explicit, so a UK-style MPG figure is not silently treated as the same unit as a US MPG figure.
By Dr. Hassan Khames EliwaLast updated
Result
- Imperial fuel economy
- 36.03 imperial MPG
- Metric fuel consumption
- 7.84 L/100 km
How it works
Two gallon sizes, one distance definition
A US liquid gallon is exactly 3.785411784 litres. An imperial gallon is exactly 4.54609 litres. The mile used here is exactly 1.609344 kilometres. Because an imperial gallon holds more fuel, the same vehicle and journey have a higher numerical imperial MPG than US MPG. That difference is a unit conversion, not improved vehicle performance.
Consumption runs in the opposite direction
MPG measures distance travelled per quantity of fuel. Litres per 100 kilometres measures fuel used per fixed distance. Higher MPG therefore means lower consumption, while a lower L/100 km number means lower consumption. The relationship is reciprocal, not a simple constant multiplier between MPG and L/100 km.
For US MPG, L/100 km equals 100 × 3.785411784 ÷ 1.609344 ÷ MPG. For imperial MPG, replace the gallon volume with 4.54609. The calculator converts through an unrounded L/100 km value and then displays all three units to two decimal places. Intermediate rounding would create avoidable differences when converting back and forth.
A rate converter, not a road test
Enter an existing fuel-economy or consumption rate. The form does not accept an odometer distance and a refill volume, and it does not estimate consumption from vehicle age, engine size or driving style. A reliable measured rate requires consistent distance and fuel records. Short trips, incomplete fills, temperature, traffic, load and route can all affect the number you start with.
Official test-cycle ratings and real-world measurements are not necessarily interchangeable. Converting a rating into another unit preserves its original test assumptions. For a spending estimate, use the fuel cost calculator with a suitable consumption assumption and local fuel price. This conversion alone does not predict your bill or future driving conditions.
Worked example
Example 1: a US rating
Select US MPG and enter 30. The displayed outputs are 30.00 US MPG, 36.03 imperial MPG and 7.84 L/100 km. All three describe the same rate. The imperial number is larger because the imperial gallon is larger; the car has not gained efficiency merely because the display uses a different label.
Example 2: a metric consumption figure
Select L/100 km and enter 7.5. The results are 31.36 US MPG, 37.66 imperial MPG and 7.50 L/100 km. The metric input is retained without rounding during conversion. If comparing this example with the first, lower metric consumption corresponds to higher MPG in both gallon systems.
Expert tips
Common mistakes
- Treating MPG and consumption as linear opposites. Equal changes in MPG do not imply equal changes in litres saved over a fixed distance. The reciprocal relationship matters when judging efficiency improvements between vehicles.
- Comparing an imperial figure directly with a US figure. A larger unlabeled MPG number may simply use a larger gallon. Normalize both values into the same unit before drawing a conclusion about economy.
- Averaging trip MPG without weighting. A simple average of separate MPG readings can misrepresent total economy when trip distances differ. Combine total distance and total fuel first, then calculate the overall rate.
Frequently asked questions
Which MPG should I choose for a UK figure?
UK fuel-economy figures commonly use imperial MPG, but verify the source label rather than relying on location alone. Imported vehicles and international websites may display a different gallon convention.
Why is a smaller L/100 km value better?
It represents less fuel required to cover the same distance. MPG instead expresses how far a fixed quantity of fuel carries you, so its direction of improvement is reversed.
Can I enter zero for an electric vehicle?
No. Zero liquid-fuel consumption cannot be converted into an ordinary finite MPG value by this reciprocal model. Electricity use and MPGe require different units and assumptions, which this calculator does not supply.
Does this estimate fuel cost?
No. A cost estimate also needs distance and a fuel price in compatible units. This page converts the consumption rate only, leaving price changes and route-specific use outside its scope.
Why might another converter differ slightly?
Different displayed precision or rounded conversion constants can produce small differences. This implementation uses exact gallon and mile definitions internally, then rounds each final display to two decimal places.
Related calculators
Related guides
MathPercentages people get wrong: change, difference and pointsThe denominator determines the answer. Learn to distinguish percentage change, symmetric difference and percentage-point movements.14 November 2026 · 7 min read
MathStandard deviation without the jargonThe average tells you the centre. Standard deviation helps describe the spread, provided you know what the data represents.14 November 2026 · 7 min readSources and standards
About the author
Dr. Hassan Khames Eliwa holds a PhD in Construction & Built Environment and has more than 20 years of international project controls experience. He is Director of Eliwa Project Controls Limited in Auckland and founder of PMMilestone.org and PMMilestone.com.
Buy me a coffee