Fuel Cost Calculator
This calculator estimates fuel needed and trip fuel cost from distance, vehicle fuel economy and pump price. Choose kilometres with litres per 100 kilometres and price per litre, or miles with US miles per gallon and price per US gallon.
By Dr. Hassan Khames EliwaLast updated
Result
- Fuel needed
- 45.00 L
- Cost per distance
- $0.1575 / km
- Trip distance
- 600.00 km
How it works
Match the distance and fuel units
Metric consumption tells you how many litres the vehicle uses to travel 100 kilometres. Divide the trip distance by 100, then multiply by the consumption figure. US MPG works in the opposite direction: it tells you how far one US gallon takes the vehicle, so divide miles by MPG to obtain gallons. In either system, multiply fuel quantity by pump price to estimate spending.
Select the unit system before entering values. The form keeps separate metric and imperial fields; switching systems does not convert your previous entries. Imperial mode here explicitly means miles and US gallons, not UK imperial gallons. Those gallons have different volumes, so a UK MPG figure cannot be used unchanged in the US MPG field.
Choose a realistic consumption figure
A manufacturer’s combined figure is a useful starting point, not a guarantee for every trip. Stop-start traffic, speed, hills, towing, temperature and tyre condition can all change fuel use. A recent measured consumption value from comparable driving is usually a more useful planning input than an especially economical trip from months ago.
You can measure consumption by filling the tank, recording the distance, driving normally, then recording the fuel added at the next comparable full fill. Divide litres added by kilometres travelled and multiply by 100 for L/100 km. For US MPG, divide miles travelled by US gallons added. Use several fills to reduce the effect of differences in pump shut-off.
Know what the estimate excludes
This is a fuel-only estimate. It excludes parking, tolls, maintenance, insurance, depreciation and accommodation. It also assumes a single average consumption and pump price for the whole distance. For a route with sharply different driving conditions or prices, calculate the legs separately and add their costs.
Zero distance is accepted and produces zero trip fuel and cost. Fuel consumption or MPG must remain above zero, while fuel price can be zero. Cost per distance describes the entered economy and price even when trip distance is zero; it is not calculated by dividing the total cost by zero.
Worked example
A 600-kilometre drive
Choose Metric and enter a distance of 600 km, consumption of 7.5 L/100 km and fuel price of $2.10 per litre. Fuel needed is 600 × 7.5 ÷ 100 = 45.00 L. Multiplying 45 by $2.10 gives a trip fuel cost of $94.50.
The cost per kilometre is 0.075 × $2.10 = $0.1575 / km. That is a fuel estimate for the entered 600 km, so include the return journey in the distance if your plan requires it.
For the US example, choose Imperial and enter 300 miles, 30 MPG US and $3.50 per US gallon. Fuel needed is 10.00 US gal, trip cost is $35.00, and cost per mile is $0.1167 / mile after display rounding. These are separate example inputs, not converted versions of the metric trip.
Expert tips
Common mistakes
- Putting UK MPG into US MPG. An imperial gallon is larger than a US gallon. Check the vehicle display setting or the specification source before entering a miles-per-gallon figure.
- Reversing consumption and efficiency. Lower L/100 km means less fuel is used; higher MPG means less fuel is used. Moving both figures upward does not represent the same change.
- Calling fuel cost the full driving cost. A trip can create wear and other expenses even if fuel is inexpensive. Keep reimbursements or vehicle ownership comparisons separate from this narrow estimate.
Frequently asked questions
Does imperial mode use UK gallons?
No. It uses US gallons and MPG US. Convert a UK MPG figure before entering it, and pair US MPG only with a price per US gallon.
Does changing units convert my values?
No. Each system has separate distance, economy and fuel-price inputs. Enter a consistent set for the selected system rather than assuming that changing the selector converts the numbers.
Can I estimate a round trip?
Yes. Enter the combined outbound and return distance. If their consumption or fuel prices differ substantially, calculate the legs individually and add the costs.
Why is my actual fuel use different?
The result assumes constant average consumption. Traffic, weather, route gradients, load and driving style can change that average. Compare measured figures over several similar trips.
How can I split the fuel bill?
Divide the trip fuel cost by the number of people sharing it, using the average calculator if helpful. Agree separately whether tolls, parking or other vehicle costs are also shared.
Related calculators
Related guides
MathPercentages people get wrong: change, difference and pointsThe denominator determines the answer. Learn to distinguish percentage change, symmetric difference and percentage-point movements.14 November 2026 · 7 min read
MathStandard deviation without the jargonThe average tells you the centre. Standard deviation helps describe the spread, provided you know what the data represents.14 November 2026 · 7 min readSources and standards
About the author
Dr. Hassan Khames Eliwa holds a PhD in Construction & Built Environment and has more than 20 years of international project controls experience. He is Director of Eliwa Project Controls Limited in Auckland and founder of PMMilestone.org and PMMilestone.com.
Buy me a coffee