Unit Converter
This unit converter translates a numeric value between supported units of length, mass, temperature, volume, area and speed. Choose a category, select its source and destination units and enter a value; temperature conversions apply offsets as well as scale factors.
By Dr. Hassan Khames EliwaLast updated
Result
- Original value
- 1 m
How it works
Start with the quantity, not the unit label
The category determines which unit selectors appear. Length units cannot be converted into area units, and mass cannot be converted into volume without an additional material property such as density. Hidden selectors from another category are ignored, so changing from length to speed uses only the speed choices.
Most conversions use one reference unit per category: meters for length, kilograms for mass, liters for volume, square meters for area and meters per second for speed. Each supported unit has a factor relative to its category’s reference. The value is multiplied by the source factor and divided by the destination factor.
Temperature needs an offset
Celsius, Fahrenheit and kelvin are not interchangeable through multiplication alone. The calculator first converts the reading to kelvin, then converts kelvin to the selected destination scale. These are absolute temperature readings, not temperature differences.
Negative Celsius and Fahrenheit readings are valid, but temperatures below absolute zero are rejected. Other categories require nonnegative values because this tool describes quantities such as distance, area and mass rather than signed vector components.
Definitions behind familiar units
The international foot is exactly 0.3048 meters, so an international mile is exactly 1,609.344 meters. A pound of mass is exactly 0.45359237 kilograms. The pound here is not pound-force; converting a force requires a different category and a specified acceleration.
Volume choices distinguish US liquid gallons from Imperial gallons. A US liquid gallon is exactly 3.785411784 liters, while an Imperial gallon is 4.54609 liters. The fluid ounce option is explicitly US fluid ounces. It must not be confused with the mass ounce in the mass category.
Area factors already contain the square relationship. Since one foot is 0.3048 meters, one square foot is 0.09290304 square meters, not 0.3048. Speed similarly relates distance to time: kilometers per hour become meters per second by dividing by 3.6. A knot is one international nautical mile, 1,852 meters, per hour.
Results show up to ten decimal places with trailing zeros removed. Very small values may therefore appear as zero, and long decimal results are rounded for display. Conversion definitions do not make a measured input more precise than the original instrument.
Worked example
Three practical checks
For length, enter 1, choose m as the source and ft as the destination. The converted value is 3.280839895 ft. This is the displayed ten-decimal rounding of the reciprocal of 0.3048.
For temperature, convert 20 °C to °F. Adding 273.15 gives 293.15 K; converting to Fahrenheit gives 68 °F. Multiplying 20 by 1.8 alone would miss the required 32-degree offset.
For volume, convert 1 US gal to L. The result is 3.785411784 L. Selecting Imperial gal instead gives 4.54609 L for the same input value of 1. These are different unit definitions, not a rounding discrepancy. Record which gallon you used when sharing a recipe, tank specification or fuel calculation.
Expert tips
Common mistakes
- Using a linear factor for area. Square feet and square meters require squared length factors. The area category applies those factors automatically.
- Treating a temperature change as an absolute reading. A rise of 10 °C equals a rise of 18 °F, not an absolute reading of 50 °F. This calculator converts readings.
- Confusing weight and volume ounces. Mass ounces measure how much matter is present; fluid ounces measure space. Converting between them requires density.
Frequently asked questions
Are metric and imperial units both supported?
Yes. Supported categories include common SI and customary units, with category-specific source and destination selectors. Volume labels distinguish US and Imperial definitions.
Can I convert kilograms to liters?
Not directly. That conversion depends on density, which changes with the material and sometimes temperature. Mass and volume remain separate categories here.
Why can temperature be negative?
Celsius and Fahrenheit have zero points above absolute zero. Negative readings can be valid; the calculation rejects readings below zero kelvin.
Does the tool use survey feet?
No. Feet use the international definition of exactly 0.3048 meters. Specialized historical survey units are not included.
How many decimals are shown?
Up to ten decimal places, with trailing zeros trimmed. The display may round extremely small results to zero; choose a more suitable destination unit when that happens.
Related calculators
Related guides
MathPercentages people get wrong: change, difference and pointsThe denominator determines the answer. Learn to distinguish percentage change, symmetric difference and percentage-point movements.14 November 2026 · 7 min read
MathStandard deviation without the jargonThe average tells you the centre. Standard deviation helps describe the spread, provided you know what the data represents.14 November 2026 · 7 min readSources and standards
About the author
Dr. Hassan Khames Eliwa holds a PhD in Construction & Built Environment and has more than 20 years of international project controls experience. He is Director of Eliwa Project Controls Limited in Auckland and founder of PMMilestone.org and PMMilestone.com.
Buy me a coffee