Square Footage Calculator
This square footage calculator finds the area of rectangles, triangles, circles and L-shaped spaces from measured dimensions. It reports square feet and square metres together, and can multiply either area by an optional material rate.
By Dr. Hassan Khames EliwaLast updated
Result
- Area (m²)
- 20.00 m²
How it works
Choose the outline before measuring
A rectangular room needs its internal length and width. A triangle needs a base and the height measured at a right angle to that base, not the sloping side. A circle uses its radius: half the distance across the circle through its centre. All linear dimensions use the selected unit system, either metres or feet.
For an L-shaped room, imagine the complete outside rectangle, then subtract the rectangular corner that is missing. Enter both outside dimensions and both dimensions of that cutout. The missing corner must be smaller than the outside rectangle in each direction. This method assumes straight sides and right angles; it is not suitable for a curved recess or an angled extension.
Area and conversion formulas
The international foot is exactly 0.3048 metres, so the square-foot conversion is exact before display rounding. Calculations retain full precision internally. Switching the unit selector changes how the entered numbers are interpreted; it does not rewrite the measurements already in the fields.
Keep measurement and pricing units separate
A contractor may measure in feet but receive a flooring quote per square metre. Select the appropriate cost basis rather than changing your measurements. A blank rate leaves cost out of the results, while a zero rate returns zero cost. The dollar symbol is a generic currency marker: this tool does not convert currencies or add tax, installation, delivery, trim or waste.
Worked example
A rectangular utility room
Measure a room 5 m long and 4 m wide. Select metric and rectangle, then enter a material rate of 25 per m². The area is 5 × 4 = 20.00 m², equivalent to 215.28 ft². The estimated material cost is $500.00.
If a 2 m by 1 m corner is missing, select L-shape with the same outside measurements. Subtract 2.00 m² from 20.00 m² to get 18.00 m², or 193.75 ft². At the same rate, the material-only estimate is $450.00. These are measured areas, not purchasing quantities; flooring cartons or sheet layouts still need their own allowance.
Expert tips
Common mistakes
- Entering a circle’s diameter as its radius makes the calculated area four times too large. Divide the measured diameter by two before entering it.
- Using a triangle’s sloping edge as its height overstates area unless that edge actually meets the selected base at a right angle.
- Subtracting a cutout measured from the wrong sides can remove a real part of the room. Both cutout dimensions describe the missing rectangle, not the widths of the remaining legs.
Frequently asked questions
Can I enter feet and inches?
Enter decimal feet. For example, 12 feet 6 inches is 12.5 feet, not 12.6. Convert the inches by dividing by 12 before adding them to the whole feet.
Does the calculator include waste?
No. It measures geometric area. Add a material-specific allowance afterward; the right allowance depends on the product, layout and whether offcuts can be reused.
Can I calculate several rooms?
Calculate each room separately and add the unrounded areas where possible. Keep the measurements and room names in your takeoff so you can review omissions without measuring the entire job again.
Why are both square feet and square metres shown?
They describe the same physical area. Displaying both helps you compare quotes without mistaking a per-square-foot rate for a per-square-metre rate.
Does this calculate official property floor area?
Not by itself. Legal, valuation and listing measurements may specify how walls, stairs and low ceilings are treated. Follow the measurement rules applicable to your purpose and location.
Related calculators
Related guides
Construction & ProjectHow to order concrete without running short or overpayingA field-focused guide to concrete quantities, thickness checks, sensible allowances and the delivery details that prevent expensive surprises.14 November 2026 · 7 min read
Construction & ProjectThree-point estimating: when PERT beats a single guessA practical guide to three-point duration estimates, weighted averages and the limits of turning uncertain activities into a promised date.14 November 2026 · 7 min readSources and standards
About the author
Dr. Hassan Khames Eliwa holds a PhD in Construction & Built Environment and has more than 20 years of international project controls experience. He is Director of Eliwa Project Controls Limited in Auckland and founder of PMMilestone.org and PMMilestone.com.
Buy me a coffee